Brother Hobby Returner R3 1402 8100kv - Single

  • Sale
  • $14 AUD
  • Regular price $20 AUD


The Returner R3 1402 motor is micro-sized to suit the every growing brush-less micro-quad segment that runs 1 to 2.5" propellers.

The wider stator of this motor provides sufficient torque to ensure your micro-quad is super responsive. But still retains a high level of efficiency so as not to over draw your tiny 300-500mAh LiPos.

The classic Returner design has been modified to suit the 2/4 screw pattern instead of traditional prop nut and the base features a 9x9mm bolt hole pattern. 150mm of 26AWG silicone wire should be more than enough to reach a 4in1 ESC all the way in the center of your stack.

Specifications:

  • Model: Returner R3 1402
  • KV: 8100kV
  • Weight: 6g (out of the box with 150mm wire)
  • Wire AWG: 28AWG
  • Stator Diameter: 14mm
  • Stator Height: 2mm
  • Stator Lamination Thickness: 0.15mm
  • Rotor: N52H (arc magnets)
  • Casing Material: Al 7075
  • Shaft Diameter: 2mm
  • Shaft Material: TBC
  • Shaft Thread: N/A uses four M2x4mm prop retaining screws
  • Motor Bearings: ?x5x2mm (height TBC)
  • Configuration: 12N14P
  • Motor Diameter (can): 18.2mm
  • Motor Height: 11.8mm (bottom of base plate to top of bell)
  • Prop Shaft Thread:N/A
  • Prop Shaft Length: 4mm
  • Input voltage: 2S-3S (8.4 -12.6V) 

Includes:

  • 4x M2x4mm Prop Mounting Screws
  • 4x M2x7mm Motor Mounting Screws

 

Bench Tests: 

  • Coming Soon!