NOTICE: We apologise for the lack of stock. We're a little down, but not quite out at this stage. Thank you for your patience.

HyperLite EVO HD 5"

  • Sale
  • $90 AUD

The PyroDrone HyperLite EVO HD is a 5" stretch-X frame that is designed to accommodate HD FPV Equipment such as the Connex** or standard FPV equipment. The stretched X geometry makes controlling your pitch easier during racing, allowing you to focus on your cornering.

This is a race bred frame that provides good camera protection. Has plenty of room for a PDB + FC stack while leaving plenty of room for your RX and VTX. The frame also provides a centralised mounting hole for your VTX antenna. This helps protect it from crash damage by keeping it out of the props.

With 3mm arms this frame come in at just 77 grams.

 ** Please Note: The standard frame kit comes with a normal FPV camera mount. The HD FPV Mounting Kits are sold seperately and includes 3D Printed TPU mounts for the Connex camera and aftermarket Taoglas Antennas refer to Brain3D website for more details.


Frame Weight 77g
Motor to Motor (size) 113x94x145mm (LxWxD)
Main Plate Thickness (arms) 3mm
Motor Sizes Supported 18xx-22xx (M3 screw holes to suit a 16x19mm pattern)
ESCs 20-30A
Prop Size 5" (Gemfan 5152 Props fit without any issue)
LiPo 3S-4S/1000-1500mah
Compatible PDBs and FCs

Any 36x36mm board (30.5*30.5mm mounting holes)

  • 2x 3mm HyperLite EVO Arms
  • 1x 2mm HyperLite EVO Bottom Plate
  • 1x 2mm HyperLite EVO Mid Plate
  • 1x 2mm HyperLite EVO HD Top Plate
  • 4x High Quality light weight Textured 30mm Anodized Stand Offs
  • 2x High Quality light weight Textured 28mm Anodized Stand Offs
  • 4x 3x25mm Screws
  • 6x 3x8mm Screws
  • 6x 3x6mm screws
  • 2x 3x12mm screws
  • 6x M3 Anodized Locknuts
  • 1x TPU 3d Printed KababFPV Universal FPV Cam mount
  • 1x Rubberised Battery Pad
  • 4x Rubberised Motor Soft Mount Pads
  • 1x 16x215mm HyperLite Battery Strap
  • 1x HyperLite Sticker


Suggested Parts:


Spare Parts are available... if you've broken something and need a spare please contact us!



A post shared by Hubert Ott (@hottflush) on